EN
61340-5-1, BS EN 61340-5-1
Protection
of electronic devices from electrostatic phenomena - General requirements
See IEC 61340-5-1
|
This
standard replaced EN100015 in Europe in 1998. Identical with
IEC 61340-5-1.
BS EN 61340-5-1 is the British Standard version. |
EN
61340-5-2
Protection
of electronic devices from electrostatic phenomena - User Guide
|
User
Guide for use with EN 61340-5-1. Gives a considerable amount of additional
technical guidance to support implementation of 61340-5-1. |
Protection
of Electrcal and Electronic Parts, Assemblies and Equipment (Excluding
Electrically Initiated Explosive Devices)
|
ANSI
ESD Association Standard becoming widely used in North America and
world wide.
See
the full range of ESDA
standards and publications.
Download
ANSI/ESD S20.20 free! (pdf format, source ESD Association)
|
EN100015-1
1992
Basic
specification: Protection of electrostatic sensitive devices. Part
1. General Requirements
|
European
standard superceded by 61340-5-1 in 1998. |
EN100015-2
Basic
specification: Protection of electrostatic sensitive devices. Part
2. Particular requirements for low humidity areas |
Additional
Part of EN10015 dealing with low humidity areas.
Now
superceded by 61340-5-1
|
EN100015-3
Basic
specification: Protection of electrostatic sensitive devices. Part
3. Particular requirements for clean rooms
|
Additional
Part of EN10015 dealing with clean room areas.
Now
superceded by 61340-5-1
|
EN100015-4
Basic
specification: Protection of electrostatic sensitive devices. Part
4. Particular requirements areas with high voltages present
|
Additional
Part of EN10015 dealing with areas containing high voltages (>250Vac
or 500Vdc).
Now
superceded by 61340-5-1 |
IEC
61340-5-1
Protection
of electronic devices from electrostatic phenomena - General requirements
|
Has
the status of Technical Report. Developed by the International Electrotechnical
Committee TC101 Electrostatics to foster world standardisation of
ESD prevention measures.
IEC
TC101
information pages, publications
and workprogramme
|
IEC
61340-5-2
Protection
of electronic devices from electrostatic phenomena - User Guide
|
User
Guide for use with IEC 61340-5-1. Gives a considerable amount of
additional technical guidance to support implementation of 61340-5-1.
It
is currently planned to replace this with a user Guide to accompany
the full world standard document at the end of 2004. |
MIL-STD-1686A
1988
Electrostatic
discharge control program for protection of electrical and electronic
parts, assemblies and equipment (excluding electrically initiated
explosive devices)
|
U.S.
Military Standard.
Download
MIL-STD-1686
(.pdf, 577kB) from the Defense Supply Centre, Colombus site.
|
ANSI/EIA
541
Packaging
of electronic products for shipment
|
|